Greenhouse Exhaust Fan: 10 Signs You Need One and How to Size It

A greenhouse exhaust fan pushes hot, damp air out so fresh air can come in. You likely need one if your greenhouse runs hot on sunny days, drips with condensation or keeps losing plants to mold. The fix is usually one fan sized to the air volume of your greenhouse, plus an air intake and a thermostat.

✅ Quick answer

  • The top warning signs are heat spikes, heavy condensation and mold. Wilting on sunny afternoons is another.
  • Size the fan for about one full air change per minute in summer: CFM = length × width × average height.
  • A Riga 5 needs roughly 1,100 to 1,300 CFM, so one 16" fan does the job.
  • Add an air intake at least 1.25 times the fan's size, low on the opposite end.
  • A thermostat turns the fan on only when it is needed.
Thermometer among greenhouse plants showing high heat, a sign you need a greenhouse exhaust fan
A thermometer at plant height tells you more than any feeling. Heat that keeps climbing on sunny days is the first sign you need a fan.

We are a small, woman-owned greenhouse business in Georgia, and we answer every question personally. Ventilation is one of the most common things our customers call about, usually after their first hot spell. This guide covers the real warning signs, how to size a fan and how to choose between the greenhouse fans we carry.

Why does a greenhouse need an exhaust fan?

A greenhouse traps the sun's heat. That is great in March and a problem in June. Even a mild, sunny day can push the inside far above the outdoor temperature.

Roof vents and an open door let some heat escape. But on still, humid days, air barely moves on its own. A greenhouse exhaust fan forces the air out, so the whole house gets fresh air in minutes.

Moving air also does three quiet jobs:

  • It lowers humidity. Plants release water all day. A fan carries that damp air out before it settles on leaves.
  • It refreshes carbon dioxide. Plants use CO2 to grow, and a closed greenhouse can run low on sunny days.
  • It keeps temperatures even. Fewer hot and cold pockets means steadier growth.

What are the signs you need a greenhouse exhaust fan?

Older lists, including an earlier version of this post, named 14 signs. Several of them were the same problem in different words. Here are the 10 signs that really matter.

1. It gets too hot on sunny days

If your thermometer climbs well past the outdoor temperature by midday, your vents can't keep up. Many vegetable crops slow down when the air stays in the 90s °F. Tomatoes and peppers may drop their flowers.

2. Your plants wilt every afternoon

Wilting at 3 p.m. that recovers by evening is classic heat stress. The roots can't pull water up as fast as the leaves lose it. More water won't fix it, but cooler, moving air will.

3. The walls drip with condensation

Some morning fog on the glazing is normal. Water running down the panels for hours is not. It means humid air has nowhere to go.

Condensation fogging the glass panes of a greenhouse, a sign of poor greenhouse ventilation
Heavy condensation that lingers for hours is a sign that damp air is trapped inside.

4. You see mold, mildew or gray fuzz

Powdery mildew and botrytis (gray mold) love damp, still air. If they keep coming back, the cause is often the air, not the plant. Lower humidity makes it much harder for these diseases to spread.

5. The air smells musty or stale

A musty smell means damp air is sitting still. It often shows up before mold does, so treat it as an early warning.

6. Seedlings collapse at the soil line

Damping off kills young seedlings, often right where the stem meets the soil. Wet, stagnant conditions make it worse. Better airflow is one of the simplest ways to protect seed trays.

Young seedlings in trays on a rack inside a greenhouse that need good airflow
Seed trays are the first to suffer in still, damp air.

7. Big temperature swings between corners

Put two thermometers in your greenhouse, one high and one low. A big gap means hot air is pooling under the roof. An exhaust fan high on the end wall pulls that hot layer out.

8. Pests keep coming back

Spider mites, for one, thrive in hot, dry corners. Whiteflies and aphids also build up fast in still air. A fan is not a pest cure, but even airflow makes the house less friendly to them.

9. Poor fruit set on tomatoes, peppers or cucumbers

Heat can make pollen weak, so flowers drop without setting fruit. Gentle air movement also helps shake pollen loose in self-pollinating crops like tomatoes.

10. You can't open the vents by hand every day

If you work away from home, a sunny morning can cook a closed greenhouse by noon. A fan on a thermostat runs while you are gone. Pair it with well-placed roof vents and automatic openers for hands-free cooling.

💡 Tip: buy a min/max thermometer before you buy a fan. One week of readings tells you how big the problem really is, and when it happens.

What size greenhouse exhaust fan do I need?

Size the fan by the volume of air in your greenhouse, not just the floor. UMass Extension advises about one full air change per minute in summer. In winter, about a quarter of that is enough, and a thermostat handles the difference.

📐 Greenhouse exhaust fan CFM formula

Fan CFM = Length × Width × Average height × Air changes per minute

Measure in feet · Average height = halfway between the wall height and the peak · Air changes = 1 for summer, about 0.25 for winter

🧮 Worked example: a Hoklartherm Riga 5 in summer

  • Floor space from the product page: 165 sq ft (9'8" x 17'6")
  • Peak height 7'7". We estimate the arched roof gives an average height of about 6.5 ft
  • 165 × 6.5 × 1 = about 1,070 CFM

Cross-check: Greenhouse Management magazine's rule of 7 to 10 CFM per sq ft of floor gives 1,155 to 1,650 CFM. So aim for roughly 1,100 to 1,300 CFM. The Riverstone fan, rated 1,250 CFM, lands right in that range. Our product page also lists the 16" Exaco fan for the Riga 5.

Hoklartherm Riga polycarbonate greenhouse in a garden, sized for a 16 inch greenhouse exhaust fan
A Hoklartherm Riga greenhouse. The Riga 5 needs about 1,100 to 1,300 CFM on a summer day. Photo courtesy of Hoklartherm.

Fan size by greenhouse model

Our exhaust fan product page matches each size to the greenhouses we sell:

  • 12" fan: Riga 2, 3 and 4, and Junior Victorian (side panel only, not the gable end).
  • 16" fan: Riga 5, Royal Victorian VI34, VI36 and VI46, and the EOS T-shaped 13x13.
  • 20" fan: Riga XL 7, 8 and 9.

Have a different greenhouse? Run the formula above, then call us. We will check your numbers.

Which greenhouse exhaust fan should I buy?

We carry three exhaust fans for backyard greenhouses. Here is how they compare, using the details on each product page.

Fan Size and airflow Power Best for Approx. price*
Exhaust Fan for Riga and Victorian Greenhouses 12", 16" or 20" 110V, pre-wired 9 ft plug-in cord Riga and Royal Victorian owners; optional thermostat and custom Lexan panel about $325 to $425
Riverstone Greenhouse and Small Building Exhaust Fan System 16", 1,250 CFM, built-in shutter 120V, 1/10 HP direct-drive motor Most greenhouse brands; made in the USA about $400 (about $520 with thermostat)
Exaco Solar Powered Exhaust Fan and Ventilation System 16" x 16", brushless motor About 50W solar panel, 20 ft cord Greenhouses with no outlet nearby about $849

*Prices checked in November 2026. Prices can change and sales may apply, so click the model name to see today's price.

Exaco Exhaust Fan for Riga and Victorian greenhouses

Exaco greenhouse exhaust fan for Riga and Royal Victorian greenhouses
The Exaco exhaust fan comes in 12", 16" and 20" sizes. Photo courtesy of Exaco.

The Exaco greenhouse exhaust fan is made for Riga and Royal Victorian greenhouses. It comes pre-wired with a 9 ft, 110-volt plug-in cord. You can add a thermostat with its own 8 ft cord for about $100 more (November 2026).

It is usually mounted high on the back wall. Glass can't be cut, so for glass greenhouses we offer a custom-cut Lexan panel that holds the fan in the gable end.

Riverstone Greenhouse and Small Building Exhaust Fan

The Riverstone exhaust fan is the only fan here with a published airflow: 1,250 CFM from a 16" blade. It has a built-in shutter, a totally enclosed motor and an automatic shut-off. It weighs about 20 lbs and is made in the USA.

It mounts from inside or outside. From outside, you cut an opening about 17" x 17". From inside, about 16¼" x 16¼". Fasteners are not included, and every structure needs some adapting.

Exaco Solar Powered Exhaust Fan

Exaco solar powered greenhouse exhaust fan and ventilation system
The Exaco solar exhaust fan runs with no outlet. Photo courtesy of Exaco.

No outlet near your greenhouse? The Exaco solar fan runs from its own panel. It includes a thermostat and a case for two 12-volt backup batteries (batteries not included). The airflow can also be reversed to pull fresh air in. Its brushless motor has a lifetime warranty.

We cover solar sizing, batteries and panel placement in our solar powered greenhouse setup guide.

📌 About prices: manufacturers update their prices during the year, and we often run sales and promotions. The price on the product page is always the current one. Prices in this article are a guide from when we wrote it (November 2026), not a quote or guarantee. Found a lower price for the same model at an authorized retailer? We offer a Price Match Guarantee - please check the rules first. Call us and we will confirm today's price and any current deals.

Does a greenhouse exhaust fan need an air intake?

Yes. A fan can't push out more air than it can pull in. Without an intake, it just strains against the walls. UMass Extension says the intake should be at least 1¼ times the fan area.

📐 Air intake formula

Intake area (sq ft) = Fan width × Fan height ÷ 144 × 1.25

Measure the fan in inches · 144 turns square inches into square feet

For a 16" fan: 16 × 16 ÷ 144 × 1.25 = about 2.2 sq ft. A 20" intake shutter gives about 2.8 sq ft, so it covers that with room to spare. That is why our Greenhouse Intake Power Shutter Vent page pairs its 20" size with the Riga 5 and Royal Victorian VI34 and VI46.

  • 16" shutter: Riga 2, 3 and 4. About $340 (November 2026).
  • 20" shutter: Riga 5, VI34 and VI46. About $360 (November 2026).
  • 24" shutter: Riga XL series. About $385 (November 2026).

An open door or a low side window can also work as the intake. Just make sure it is open whenever the fan runs.

Where should a greenhouse exhaust fan go?

Hot air rises, so the fan goes high and the intake goes low. Put them at opposite ends, so fresh air sweeps across the plants on its way out.

  1. Fan high on the back wall. Our product pages place the exhaust fan high on the back wall.
  2. Intake on the front wall. The intake shutter goes in the lowest panel of the front wall, at the far end from the fan.
  3. Mind the wind. UMass notes that a fan blowing into the summer wind loses 10% or more of its output. Exhaust downwind if you can.
  4. Keep the thermostat in the shade at plant height, in the middle of the house, so it reads the air your plants feel.
Exaco Janssens Royal Victorian VI46 glass greenhouse, which takes a 16 inch greenhouse exhaust fan
A Royal Victorian VI46. In glass greenhouses, the fan sits in a Lexan panel in the gable end. Photo courtesy of Exaco/Janssens.

⚠️ Glass greenhouses: never cut a glass pane to fit a fan. It will shatter. Ask us for a custom-cut Lexan panel when you order the Exaco fan. In polycarbonate greenhouses, the sheet can be cut to fit.

Do I need a thermostat for my greenhouse fan?

We strongly suggest one. Without it, the fan runs all the time or only when you remember to switch it on. A thermostat turns it on when the air gets warm and off when it cools.

The Exaco fan and intake shutter both work best with the VC115-C thermostat controller. For the Riverstone fan, choose the version with a thermostat or add the RSI Single Stage Thermostat (about $159, November 2026).

🌿 Our setup tip: let the free cooling work first. Automatic roof openers start opening around 72°F. Set the fan a few degrees higher, so it only kicks in when the vents can't keep up.

Exhaust fan or circulation fan: what is the difference?

An exhaust fan swaps inside air for outside air. A circulation fan just stirs the air already inside. They solve different problems.

  • Exhaust fan: best for heat and humidity in spring, summer and fall.
  • Circulation fan: best in winter, when you want to keep warm air in but stop damp pockets and cold corners.

Many greenhouses benefit from both. If heat is your main problem, start with the exhaust fan. For more ways to beat the heat, read our four ways to cool a greenhouse without electricity.

We offer free shipping to the continental US and optional assembly crews. Browse every option in our greenhouse fans collection.

Frequently asked questions

Do I really need an exhaust fan in a small greenhouse?

Not always. A small greenhouse with good roof vents, automatic openers and a shady spot may stay cool enough. If you see heat spikes, constant condensation or mold, a small fan is worth it.

What size exhaust fan do I need for my greenhouse?

Multiply length × width × average height in feet. That number is the CFM for one air change per minute in summer. A Riga 5 needs about 1,100 to 1,300 CFM.

Should a greenhouse fan blow in or out?

For cooling, mount it to blow out, high on one end, with a low intake on the other end. The Exaco solar fan can switch direction if you ever want to pull air in.

Can I run an exhaust fan without electricity?

Yes. A solar fan kit runs from its own panel, and backup batteries keep it going in weak light. Automatic vent openers add free cooling with no power at all.

Should the exhaust fan run in winter?

Only a little. On sunny winter days it clears damp air and stops overheating. Set the thermostat higher in winter so the fan does not pull out heat you paid for.

Not sure which greenhouse exhaust fan fits?

Tell us your greenhouse model and size. We will help you choose the fan, intake and thermostat, confirm today's prices and let you know about any current sale.

Call 678-408-8222 · info@mulberrygreenhouses.com

See greenhouse exhaust fans →

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.