Product Description

Exaco Exhaust fan for Greenhouse Air Circulation

Exhaust fan keeps air moving through your RIGA greenhouses and for the Victorian Greenhouses to create the best possible growing environment. Available in three sizes.

Specifications and Benefits of the Exaco Exhaust fan

🌳  This fan works best with VC115-C thermostat controller.

🌳  Usually positioned in a high location in the back wall.

🌳  Comes pre-wired with 9 feet plug-in power cord.

🌳  110 volt with cord and plug

🌳  Optional thermostat with 8' cord and plug

🌳  12", 16" and 20" sizes

12" Exhaust Fan

✓  Recommended for Riga 2, 3, 4. 

✓ Junior Greenhouses (side panel only, not gable end)

✓  Unit requires a 12.25" x 12.25" opening. 

16" Exhaust Fan:

✓  Recommended for the RIGA 5, and Royal Victorian VI 34, Royal Victorian VI36,  Royal Victorian VI 46, EOS T-shaped 13x13 Greenhouse

✓  Unit requires a 16.25" x 16.25" opening. 

20" Exhaust Fan: 

✓  Recommended for RIGA XL units ( RIGA XL 7, RIGA XL 8, RIGA XL 9)

✓  Unit requires a 20.25" x 20.25" opening. 

Lexan Panel: If your greenhouse is made of glass, we cannot cut the glass to insert the exhaust fan in the gable end. We recommend purchasing a Lexan panel that we customize for you, we cut to make sure the exhaust fan fits in the gable end perfectly.

How to install the Exhaust fan and Why you need a Lexan Panel?  See Video BELOW

 * Disclaimers: Adaptations might be needed when this fan is installed in ANY greenhouse. This fan can be installed in a polycarbonate greenhouse by cutting through the polycarbonate sheet to make sure the fan fits properly. If you decide to put it in a glass greenhouse, you won't be able to cut the glass because it will shatter. We recommend using a lexan panel to fill the gaps. ****if you purchased or own a Exaco Victorian greenhouse, you can purchase the lexan panel from us and we can cut it for you to fit the gable end of the greenhouse to make sure the fan sits there properly, just let us know*******